TEMPERATURE CONTROL
The best and simple rental solution for any temporary
heating and cooling your company may need.
XQ100 RENTAL
DIMENSIONS:
LENGTH: 97"
WIDTH: 72"
HEIGHT: 98.25"
UNITED WEIGHT: 5,000 Lbs.
THE BLAZE 150
SPECS:
PRIME RATING: 36 kW (45 kVA)
STANDBY RATING: 40 kW (50 kVA)
Three-Phase, 60 Hertz, 0.8 PF
DIMENSIONS:
H = 49.2 in., W = 74.8 in., D = 35.40 in.,
Dry Weight = 2,227 lbs, Wet Weight = 2,464 lbs
"If it had not been for the team effort of ServiceMaster,
the hospital would have had to close ."
Darrin Ivey, Director of Support Services
Biloxi Regional Medical Center
Read how SRM helped this hospital during Hurricane Katrina Here.
Darrin Ivey, Director of Support Services
Biloxi Regional Medical Center
Read how SRM helped this hospital during
Hurricane Katrina Here.
"If it had not been for the team effort of ServiceMaster,
the hospital would have had to close ."
The Nation's Leading Provider of Commercial Restoration Services
ServiceMaster DSI • Copyright © 2020
844-413-3130
Your simple rental solution for power and equipment for any disaster your company may face.
"If it had not been for the team effort of ServiceMaster, the hospital would have had to close ."
Darrin Ivey, Director of Support Services
Biloxi Regional Medical Center
Read how SRM helped this hospital during
Hurricane Katrina Here.
REQUEST RENTAL SERVICE
- Single 30hp Scroll Compressor
- Direct drive High Static plenum fan with 15hp TEFC motor
- Maximum rated static pressure of 8.0 in-wg
- Rated cooling air flow of 10,000 cfm with recirculating air
- Airflow range of 4,500 – 14,500 cfm
- Hydrophilic coated, non-lanced condenser fins
- Hydrophilic coated evaporator fins
- Stainless steel hardware
- Stainless Steel drain pan
- Unit capable of operating between +35°F - 105°F ambient temperatures
- Permanently installed drain pan P-trap (protected within unit base)
- Unit heat package:
- 2 Independent stages, 64KW total
- 32KW stage 2
- 32KW stage 1
- Stainless steel sheathed, hermetically sealed, finned tubular heating elements
- Phase monitor and Incorrect phase indicator light (red)
- Circuit Breakers on all motors
- Blower VFD with inline starter and bypass switch
- Speed Potentiometer for Blower VFD to adjust the speed from 30Hz to 69Hz
- High and low-pressure safety switches
- R-410a refrigerant
- Full tubular rental frame with fork pockets & tie-down points
- Hot-dipped galvanized
- Overhead certified lift frame
- Entering and leaving air temperature sensors
- The unit can run in COOLING/HEATING or DH modes
- Cooling unit may run in HAND (manual) MODE of LOCAL (via PLC control) MODE
- The unit can control off supply or return air temperature via RS/SA switch
- In DH mode both stages of cooling and 1 stage heat may operate simultaneously
- Duct Doors factory-installed for all supply/return connections
FEATURES:
- Up to 14,500 CFM, 6.5” of Static Pressure allows for up to 200 feet of ducting
- Emergency shutdown button plus indicator lamps for Power On, Heat On, and Over Temperature. Ammeters for all 3 stages and Digital Temperature controller with remote thermostat capabilities. Fan manual over‐ride and Tempered Air Mode optional
- 68” X 31.5” X 56” 950lbs Able to fit through a 36” door opening
- 60kw = 6,650 CFM
- 90kw = 13,100CFM
- 150kw = 14,500CFM
- 512,000 BTU’s
- Availablein600Volts/3PHand480V/3PH MaxOutletTemperature=290˚F
BENEFITS:
- Operates at extremely low noise levels
- Forklift pockets, eye hooks and removable casters for easy lifting and placement
- Clean electric heat, free from the moisture and fumes associated with other types of heat
- Unique High Static Fan allows recirculation of warm inside air, resulting in even temperatures and energy savings
- Rugged, weatherproof enclosures for reliable operation outdoors
- DurableHeatingElement designed for the most demanding environments
- Stackable for off‐Season Storage
- Certified for use in the U.S. and Canada